ALARM_TRAIN_DELAYED_EVENT_TYPE

When a train visit is delayed because of pending WI's. Requires a groovy job setup. See Setup alert when train visits are delayed.

CAS_RV_REQUEST_CONTAINER_LIST

When CAS requests for on-board container list or crane work lists for a train visit.

CAS_RV_REQUEST_GEOMETRY

When N4 uses the Carrier Geometry request to send the rail geometry to CAS.

CAS_TRAIN_VISIT_UPDATE

When a response is sent to CAS on update of train visit.

EQ_RECEIVE_RO

Recorded as a receive event for equipment received through a gate against the rail order.

EQ_UPDATE_RO

When any of the order items, such as seq Nbr, Equipment Type, Quantity, ISO Group, Temperature, Ventilation, CO2, O2, etc., for a equipment rail order is updated.

NOTICE_RO

When a general notice is generated for the Rail Order.

NOTICE_RV

When a general notice is triggered and sent for the train visit.

PHASE_RV

When you advance a train visit.

RAILCAR_DAMAGED

When rail car visit is marked as damaged.

RAILCAR_INVENTORY

When rail car position is changed.

RAILCAR_REPAIRED

When rail car visit is marked as repaired.

RAILCAR_SPOTTED

Confirms when a Railcar Visit has been successfully spotted by either Transfer Point, Meter Mark, GPS, or ECS.

After spotting, the spotting status is visible in the History, Events tab of the Railcar Visit Inspector. In addition, if the com.navis.rail.business.entity package is included at the INFO (or above) level in the Logging tab in N4, specific logging information (such as "Railcar RCAR XXX has been spotted") is available in the navis-apex.log file.

RAILCAR_SPOTTING_FAILED

When spotting fails for any of the following reasons:

• The transfer point entered does not correspond to a location on the track plan

• The meter mark entered does not correspond to a location on the track plan

• The GPS coordinates entered do not correspond to a location on the track plan

• In its current position, the railcar extends beyond the end of the track plan

• The railcar could not be positioned because the railcar length is not defined.

RAILCARVISIT_RCAR_PLF_MISSING_CENTROID

Recorded as a service event when a rail move is excluded.

RCAR_PLF_MISSING_CENTROID

When Rail Load move or Rail Disch move or any moves are excluded because the railcar platform is missing centroids.

REROUTE_RAIL_ORDER

When there are routing changes in the rail order.

REROUTE_RV

Whenever the train visit is rerouted to "Next Facility".

RGC_SCHEDULER_REBALANCE

When a successful RGC Scheduler re-balance is completed.

TZ_DECKER_FAIL_TO_DECK

When the TZ Decker failed to find a transfer point for the container to be exchanged from the AGV to the ASC (or vice versa), to the rack, or to the rail transfer TP.

TZ_DECKER_FAIL_TO_DECK_TBDU

Recorded as service event when the TZ Decker failed to deck TBDU for the given work instructions.

UNIT_ACCESSORY_DERAMP

When the accessory unit is discharged from a railcar.

UNIT_ACCESSORY_IN_RAIL

When the accessory unit arrives by train.

UNIT_ACCESSORY_OUT_RAIL

When the accessory unit departs the facility by train.

UNIT_ACCESSORY_RAMP

When the accessory unit is loaded to a railcar.

UNIT_DERAMP

When the unit is discharged from a railcar.

UNIT_DISABLE_RAIL

When the Stop-Rail field in the Units view is True and you add a hold or a permission for a unit that prevents you from performing the rail operations such as RAMP, or DERAMP.

UNIT_ENABLE_RAIL

When the Stop-Rail field in the Units view is False and a unit no longer has required permissions or active holds that prevent you from performing the rail operations such as RAMP, or DERAMP. The intended outbound carrier visit of the unit must be ‘train’.

UNIT_IN_RAIL

When the unit arrives by train.

UNIT_OUT_RAIL

When the unit departs the facility by train.

UNIT_PAYLOAD_DERAMP

When the payload unit is discharged from a railcar.

UNIT_PAYLOAD_IN_RAIL

When the payload unit arrives by train.

UNIT_PAYLOAD_OUT_RAIL

When the payload unit departs the facility by train.

UNIT_PAYLOAD_RAMP

When the payload unit is loaded to a railcar.

UNIT_RAMP

When the unit is loaded to a railcar.